Huma-i black is a portable air quality monitor, which measures CO2, VOC, PM2.5, PM10, Temperature and Humidity. Its excellent portability will help you measure air quality in real time anytime & anywhere. You can carry it with you anytime & anywhere for the peace of mind you deserve.
Real-time measurement anytime & anywhere
Measures CO2, VOC, PM2.5 and PM10
Measures temperature and humidity
Displays user-friendly “ICON” mode
Sleek design for portability
Indoor and outdoor use
If you press the button for 1 second, it will be in power-on status.
It automatically switches to power-off status when not in use for 10 minutes to protect battery life. The status LED will blink 1 minute before automatic power-off.
At this time, if you press the button lightly, it will be switched on again for 10 minutes, and the mode will not change.
Mode Selection Button
Each time you press the mode select button, the display mode changes cyclically in the following order.
iAQI mode => Integrated Display Mode (PM2.5 / VOC / CO2) => WHO Mode => PM Mode (PM2.5 / PM10) => VOC Mode => CO2 Mode => Temperature/Humidity Mode
The status LED lets you know the status of VOC, PM2.5 and PM10.
|Unit of measurement||Good||Moderate||Poor||Unhealthy|
|PM2.5 - μg/m3||0~15||16~25||26~35||36~|
|PM10 - μg/m3||0~30||31~50||51~70||71~|
|VOC (ppm)||0.000 ~ 0.220||0.221 ~ 0.660||0.661 ~ 2.200||2.200 ~ 10.000|
|CO2 (ppm)||(400 ~ 700)||(701 ~ 1,000)||(1,001 ~ 2,000)||(2,001 ~ 10,000)|
iAQI mode (indoor AQI)
It displays the indoor AQI figure together with ICON.
The status LED color changes according to iAQI level – blue, green, yellow and red.
Blue : Good air quality.
Green : Moderate air quality.
Yellow : Poor air quality.
Red : Unhealthy air quality.
Integrated display mode
It is shown in a step-by-step graph so that air quality can be judged more easily than with difficult graphs.
PM2.5, VOC and CO2 can be viewed in one screen.
Graph with 4 steps shows the air quality - good, moderate, poor and unhealthy.
WHO mode (Icon mode)
You can easily recognize the good and poor state of fine dust with 4 different icons.
In this mode, it automatically displays the worst between PM2.5 and PM10.
PM (Particulate Matter) display mode
Simultaneously displays PM2.5 and PM10 measurement values.
VOC (Volatile Organic Compound) display mode
VOC concentration is displayed together with the ppm unit figures.
CO2 display mode
CO2 concentration is displayed in graph form.
It may react to other harmful gases in the surrounding environment.
If it shows a poor/unhealthy condition, use it as a ventilation guideline for indoor air management.
It shows temperature and humidity in one screen.
* In case of temperature and humidity, the temperature/humidity sensor is inside the product and may cause a deviation of 5 ~ 10%.
This icon displays the remaining battery status.
|Product||Portable Air Quality Monitor|
|CVOC||0.000 ~ 10.000ppm|
|CO2||400 ~ 10,000ppm|
|PM2.5 & PM10||0 ~ 500㎍/m3|
|Power Supply||Li-Polymer Battery|
|Charge Mode||USB micro 5 Pin|
|Operating Temperature||0 ~ 40℃ (32 ~ 104℉)|
|Storage Temperature||-20 ~ 60℃ (-4 ~ 140℉)|
|Dimension||91 X 41 X 37mm (3.6 X 1.6 X 1.5 inches)|
|Weight||60g (0.13 pound)|
|Certifications||CE FCC KC|
Huma-i outdoor air meters comparison Table
|Portable air quality monitor||CO2||VOC||PM2.5||PM10||Temperature||Humidity|
|Huma-i Black (HI-150)|
|Huma-i Skyblue (HI-120)|
|Huma-i White (HI-100)|